How to Root Galaxy S4 I9500 on Android 4 2 2 XWUBMG5 Jelly Bean Firmware

The Exynos 5 octa-core variant of Samsung Galaxy S4 (GT-I9500) has received a new software update with firmware build number I9500XWUBMG5. The new software update is still based on Android 4.2.2 Jelly Bean version and now available in India, Nepal, Sri Lanka, and Bangladesh.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XWUBMG5 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XWUBMG5 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XWUBMG5 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

GMD GestureControl ★ root apk Download

GMD GestureControl ★ root apk

Current Version : 6.3.1

Requires Android : 3.1 and up

Category : Tools

Size : 1.8M

Original Post From http://apkandroiddownloads.blogspot.com

GMD GestureControl ★ root apk Description

Control device with MULTITOUCH and MULTITASK gestures similar to iPad. Works in all applications. You can even hide status bar and enjoy full screen in your favorite games or while browsing.

"For those who tend to get tired of Android's status bar, or just want more intuitive gesture-based controls on their tablet, this app is definitely worth a shot." - Android Police

★ Try Lite version before you buy
★ Requires root access

★ Multitouch
★ Multitask - start any application, shortcut or custom action without leaving current application
★ Custom actions - LaunchPad, Start application, Previous Application, Next application, Home, Kill current application, Back, Forward, Recent application list, Recent application dialog, Menu, Notification Panel, Hide/Show status bar, Start launcher shorcut(bookmark, contacts, settings, etc), Start Tasker task, Pause gestures, Exit, Screen Off (lock), Alt+Tab, Music Play/Next/Previous, Volume, Search, Voice Search, Select Input Method.
★ Swipe 4 fingers right - open previous application
★ Swipe 4 fingers left - open next application
★ Expand 4 fingers - LaunchPad (similar to SwypePad, start any application, shortcut or custom action)
★ Pinch 4 fingers - Home gesture
★ Swipe 3 fingers down - Back gesture
★ Swipe 3 fingers up - Bottom recent applications bar
★ Swipe 4 fingers up - Hide/Show status bar (experimental)
★ Custom gestures - create your own gestures to start any application, shortcut or custom action

THERE IS NO WAY TO ANSWER MARKET COMMENTS OR CONTACT COMMENTATOR - EMAIL ME IF YOU WANT ANSWER.
Please don't post your problems in market, email me or go post to XDA, thanks:
http://forum.xda-developers.com/showthread.php?t=1535740

If your device is listed as unsupported, please read FAQ in Help tab. If it still do not work, contact me by email: goodMoodDroid@gmail.com

Description: This application allows you to control tablet with gestures.
Swipe 4 fingers up to hide status bar. Do same gesture again to restore bar.
Swipe 4 fingers right to open previous application.
Swipe 4 fingers left to open next application.
Pinch with 4 fingers anywhere on screen to return to home screen from any application.
Swipe 3 fingers down to execute back action in any application.
Swipe 3 fingers up to show custom bottom bar with recent applications.
Expand 4 fingers anywhere on screen to open LaunchPad dialog. It is similar to SwypePad and allows start your most often used applications, shortcuts or custom actions anywhere anytime with simple gesture.
Works in all applications, games and browsers.
Application will use freed space when you hide status bar. Some games even work better with status bar hidden.
There is an option to switch to single touch gestures if its more convenient. You can even create your own gestures for any action.

Full version adds following features: option to hide notification icon, custom gestures and special actions, any number of actions in LaunchPad.

Tags: Hide bar, gesture, gestures, gesture control, gesturecontrol, status bar, system bar, full screen, Honeybar, ICS, SwypePad, iPad, GMD, G.M.D.

GMD GestureControl ★ root apk Videos and Images

Visit us on http://apkandroiddownloads.blogspot.com

download

Read More..

How to Root Galaxy S3 I9300 on Android 4 3 Jelly Bean Firmware

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Font Installer Root v1 0 Download APK

Description This app allows you to choose between hundreds of fonts to apply to your whole device. You must be rooted with busybox installed. If you do not know what "root" is please dont download this app or rate poorly. Features include: - Hundreds of fonts to install with previews - Download/load fonts in background - Preview fonts page w/ swipe gestures to switch between previews - Install any font from your SD card - Backup/Restore system fonts - Choose which system fonts to override - Set the install & download path - Hot reboot (fast reboot) Donate Users (get license for 99 cents): - Select font favorites - Remove ads

Read More..

root Triangle Away apk Fast Download

[root] Triangle Away apk

Current Version : 2.90

Requires Android : 2.3.3 and up

Category : Tools

Size : 267k

Original Post From http://apktoolsdownload.blogspot.com

[root] Triangle Away apk Description

Many Samsung devices store a flash counter that keeps track of how many times you have flashed *custom* firmwares to your device. On some devices, a yellow triangle or other sort of visual warning is also displayed during boot if you are running a *custom* firmware. TriangleAway was built to disable the triangle (if a visual warning is present) and reset the custom ROM flash counter to 0. This app requires root !

You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.

When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.

On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!

!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )

Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.

Note#2: on new devices like the SGS3/SGNote2/SGNote10.1, status can only be reset on some firmwares - they must be stock firmwares!

Supported devices:

Samsung Galaxy S2:
- GT-I9100 **
- Sprint Epic 4G Touch **
- Korea SHW-M250K/L/S **

Samsung Galaxy Note:
- GT-N7000 **
- GT-I9220 **

Samsung Galaxy S3:
- GT-I9300/I9300T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Canada
- GT-I9305/I9305T/I9305N LTE **
- Korea SHV-E210K/L/S **
- Korea SHW-M440S **

Samsung Galaxy Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- SPH-L900 Sprint **
- SGH-T889 T-Mobile **
- SGH-T889V Canada **
- SGH-R950 US Cellular **
- SGH-I317/M AT&T/Canada **
- SCH-I605 Verizon ** (unlock bootloader !)
- Korea SHV-E250K/L/S **

Samsung Galaxy Camera EK-GC100 **

Samsung Galaxy Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **

Samsung Galaxy Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi

Various:
- I8160, I8190
- I9070/P
- I9082
- I9260
- S7500, S7560, S7562

** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.

Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.

Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.

For discussion and technical details, see the XDA-Developers.com thread here:

http://forum.xda-developers.com/showthread.php?t=1494114

Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.

I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/

[root] Triangle Away apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..

How to S OFF Root and Install CWM TWRP Recovery on HTC One Max

Image Credits

Key features

• Quad-band GSM/GPRS/EDGE support; 3G with HSPA; LTE
• 5.9" 16M-color 1080p Super LCD3 capacitive touchscreen with 373ppi pixel density
• Android OS v4.3 Jelly Bean with Sense UI 5.5
• Quad-core 1.7 GHz Krait 300 CPU, 2 GB RAM, Adreno 320 GPU; Qualcomm Snapdragon 600 chipset
• 4 MP autofocus "UltraPixel" camera with 1/3" sensor size, 2µm pixel size; LED flash
• 2.1 MP front-facing camera, 1080p video recording
• Wi-Fi a/b/g/n, Wi-Fi Direct and DLNA; Wireless TV-out (Miracast)
• 16GB/32GB of built-in storage, expandable via a microSD slot

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your HTC One Max Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your HTC One Max after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your HTC One Max.

Before You Begin:

• Visit HTC Dev, open an account there, click on the Unlock Bootloader icon on the page and unlock the bootloader of your HTC One Max by following the instructions given there. The users of Verizon One Max can download the Rumrunner Tool from below and achieve S-Off and root access.
• Enable USB Debugging in your device. Click Here if you dont know how to enable it.
• Download Android SDK and set it up in your PC. Click Here for full setup tutorial.
• Download & Extract ADB/Fastboot zip file in C drive of your PC.
• Download Rumrunner Tool for HTC Verizon model.
• Download unsecure kernel file for HTC One Max: Sprint_One_Max_1.16.651.4_Unsecure_kernel.Zip
• Download the following SuperUser file and copy it to your device: Superuser.Zip
• Now download your preferred custom recovery from below:
  • CWM Recovery:
    • HTC One Max (International): Recovery-Clockwork-Touch-6.0.4.5-T6ul.Img
    • HTC One Max (Sprint): Recovery-Clockwork-Touch-6.0.4.5-T6spr.Img
    • HTC One Max (Verizon): Recovery-Clockwork-Touch-6.0.4.5-T6vzw.Img
  • TWRP Recovery:
    • HTC One Max (International): Openrecovery-Twrp-2.6.3.0-T6ul.Img
    • HTC One Max (Sprint): Openrecovery-Twrp-2.6.3.0-T6spr.Img
    • HTC One Max (Verizon): Openrecovery-Twrp-2.6.3.0-T6vzw.Img

How To Root and Install CWM/TWRP Custom Recovery In HTC One Max:

1. Copy the SuperUser.zip file to your phone.
2. Download the CWM/TWRP recovery image file from above and copy it to “Android SDK Fastboot-ADB” folder. The location of the recovery file should be the same as fastboot and ADB files in the folder.
3. Connect your HTC One Max to computer via USB cable (do not use USB 3.0).
4. Now open a command prompt. To launch command box, press Shift key+Right-click on mouse and from the list of options, select “Open command window here”. Then type in the and issue the following command:

   adb devices

5. If you can see the serial number of your device in the command box, it’s is properly connected.
6. Now issue the following line to reboot your device in Bootloader mode:

   adb reboot bootloader

7. When you enter the Bootloader/HBOOT mode, highlight FASTBOOT by pressing volume down key and select it using the power button:
8. Now open the “Android SDK Fastboot-ADB” folder. Make sure you have already copied the recovery .img file here.
9. Launch a cmd window from within this folder (press Shift+Right-click on mouse) and type the command“fastboot flash recovery” followed by the name of the recovery image. For example, if you have downloaded the TWRP recovery image for the Verizon variant, type the following command line in the cmd window (you can replace the recover file name in Red with your own):

   fastboot flash recovery openrecovery-twrp-2.6.3.0-t6vzw.img

10. Now hit the Enter key:
11. Your favorite custom recovery will be installed to your HTC One Max within moments.
12. Finally, go to REBOOT BOOTLOADER option and select it.
13. Scroll to RECOVERY option and select it. You should now be taken to CWM or TWRP recovery interface.
14. Now open “install zip from sdcard” (CWM) or “Install” (TWRP) option depending on your recovery.
15. Navigate to the SuperUser.zip file and select it.
16. Confirm the installation when prompted and let it be installed.
17. When SuperUser is flashed, go to REBOOT option and select it.

Read More..